Linksys WiFi Extender Setup

Boost your existing network with Linksys WiFi Extender Setup. A device that will not only enhance your online experience but also boost your existing network signals and speed. Now you can connect multiple devices simultaneously and enjoy high speed internet across all devices. Linksys Extender will act as a signal amplifier and convert your space into a WiFi hub.

Linksys wifi extender setup is quite simple. To initiate the setup, visit the extender login page. Extending the WiFi range using Linksys range extenders is a great way to avoid dead spots on WiFi networks. Linksys wifi extender amplifies the main WiFi router’s signals before passing them on throughout the premise. It increases WiFi signal strength and minimizes penetration loss. First, log into the Linksys extender setup interface at 192.168.1.1. The steps for logging in are as follows:

• Unbox your device and plug in the extender to the power outlet.
• Observe the lights until they become stable before starting the Linksys WiFi Extender Setup.
• Connect your WiFi extender with the router using an Ethernet cable.
• Check the Ethernet cable and the Ethernet ports. They must work properly.
• Ensure that the connections are finger-tight.
• Go to the address bar of your web browser, and enter this address – extender.linksys.com.
• After you click Enter, you will have to provide a password along with a username.
• Fill in the default credentials. (If the password is incorrect or you don’t have the default password, contact us.)
• Enter your credentials and click “Login” to move further in the Linksys wifi Extender Setup process.
• Follow the on-screen instructions to reach the Linksys wifi extender setup page at http://extender.linksys.com.

Note: The steps above apply to extenders without configuration. See the further section for Linksys smart WiFi setup if your extender is already set up and configured.

You can also set up your extender using a mobile device. To initiate the Linksys WiFi Extender setup process, you need to power up your extender. Thereafter, follow the given steps:

• Connect to your extender’s WiFi.
• By using a web browser, access https://extender.linksys.com from any mobile device on your network with the same network access as your extender.
• Enter your username and password to log in to the router’s interface.
• The default password and network name are on a label at the bottom of the Linksys wifi Extender box.
• Select settings from the left side menu then select wireless settings from a drop-down menu.
• If you are not able to access the settings for your extender through the web interface, you may need to reset it.
• Perform the reset by holding down its reset button with a paper clip or pin for ten seconds before releasing it.
• Follow the on-screen instructions to complete the Linksys Extender setup process.
• Don’t forget to change the Wi-Fi network name (SSID) and password of Linksys Extender for better security purposes.

Also test your network once the Linksys WiFi Extender Setup is complete. To check the network you just need to take a WiFi enabled device and connect it with the new network. Once connected, you can use the internet on the device to check the speed. Also move around in your space to check the signal strength.

If you have a pre-configured Linksys extender, installing it will require resetting the extender first. Thereafter, you have to follow the Linksys WiFi Extender Setup steps. All you need to do is make sure that your computer, modem, and router are all connected to the same Internet connection. First, reset your device. To reset the Linksys Range Extender, hold the reset button on it for at least 10 seconds. You can use a paperclip or any sharp object if you find it difficult to press it with your finger. You’ll get a constant red blinking light to indicate that you’ve successfully performed a factory reset on the device. The range extender will restart automatically and will be reset to factory default settings. The range extender is then ready to set up. Follow these steps for the Linksys WiFi Extender setup:

• Connect your Linksys extender to your computer using an efficient Ethernet cable.
• Use The WAN port on the extender. It is a square-shaped icon, with the label “Internet.”
• Connect one end of an Ethernet cable to this port, then connect the other side of the cable to a free port on your router or modem.
• Tip: If you need more than 100 feet of extra range, buy a long Ethernet cable so that you can place both devices as far apart from each.
• Go to a web browser on your computer and enter extender.linksys.com.
• Hit “enter” and wait.
• If you are using a Mac, open the Safari browser and go to www.linksys.com/setup/Mac to download and install the Linksys Smart Wifi app on your Mac computer.

• When you’re asked, enter the default password along with the username of the Linksys extender.
• The default credentials are admin for the username and ​admin​ for the password.

When you perform Linksys WiFi Extender setup manually, you can extend the range of your existing wireless network to give you seamless coverage. The best thing about this device is that it doesn’t require any core technical knowledge to install manually. All you need is the basic knowledge of the extender, some items to complete the configuration process and follow up on these below-mentioned steps.

• Plug the Linksys range extender into an electrical outlet close to your existing WiFi router, but not in the same room.
• Make sure you place it in a location that has a clear line of sight to the router, such as near a window or doorway.
• Do not plug it in behind furniture or drapes.
• Do not plug it behind walls or other obstructions (such as other electronics).
• Open a web browser and type http://extender.linksys.com or http://192.168.1.1 inside the search bar and then press Enter on your keyboard.
• When setting up your Linksys WiFi extender it is important to make sure that you are inputting the correct address into your web browser.
• Do not use a mobile browser or public network, as these can cause problems with your configuration process.
• If you are using a proxy server to access the internet through the extender, ensure that this is disabled before proceeding.
• Type in http://extender.linksys.com or http://192.168.1.1 in the address bar.
• Wait for a new window to appear with instructions to configure your device.

Click Set Up > Manual Setup

• Enter the same wireless network name (SSID) as your existing Wi-Fi router, then enter its password.
• Click Next to continue with the setup process.
• Select the same wireless network name (SSID) of your existing Wi-Fi router.
• Choose a password that is easy for you to remember and different from the original network’s password. Avoid using any of the following characters: “,” or “.”
• The password for the existing network is case-sensitive and should have 8 characters in length. It can be a combination of letters and numbers, but not the same as your router’s password.
• Click Next

Once you see that it has connected to the network, click Next to continue with the Linksys WiFi Extender setup process. Then follow the instructions on the screen to complete setting up your Linksys extender. The setup process will take a few minutes. During this time, make sure that you do not unplug or disconnect from any of its cables (power cord, Ethernet cable, and USB cable) while continuing through each step in the setup wizard until completion.

The Linksys extender comes with a useful WPS button that makes the setup process as simple as walking in the park. So, if you fail in the first trial of the process or want to go with a more hassle-free setup, choose this method without thinking twice. However, make sure that your host device has the WPS feature. In this process, you only need to push the WPS buttons from your Linksys extender and the existing router. Follow the steps from here in the right sequence.

• First, Plug in the extender to the power socket which must be closer to the router’s one. Check if it is working properly or not.
• Press the WPS buttons from both devices ensuring there are ideal flickering lights on the panels.
• Hold the button for a few seconds or till both devices start making a connection.
• Wait till those lights turn solid and stable which will notify you that the setup is complete.
• Finally, unplug the extender and plug it where you face the slow speed of the internet.

In case your extender LED turns red in color, it signifies that your Linksys WiFi Extender Setup process fails. This happens due to several reasons. One of the major reasons is that some of the ISPs don’t support WPS features by default. This means you need to move to any other method of setup.

Linksys extender is an easy and hassle-free way to extend your Wi-Fi network. It helps you get the most out of your existing router and increase the range of your wireless connection. But if you’re a new user, you might have some queries. For you, we have the FAQ section below.