Linksys RE6300 Setup

As you get the Linksys RE6300 WiFi extender, do the unboxing of it. There will be an extender device along with a manual guide and that’s pretty much all you need. Talking of the device, there will be an antenna on both sides. Then there will be the WPS and reset function button near the right antenna. Besides that, in the manual guide, you will get basic instructions regarding the Linksys RE6300 Setup and other processes.

The Linksys RE6300 WiFi extender setup works to maximize the range of the WiFi up to 6500 sq feet with its two moveable antennas. The 802.11 AC network performs on dual 2.4GHz and 5GHz bands with cross-band technology. Moreover, the Gigabit ethernet port transfers the data 10X faster than Fast ethernet. The beamforming technology in the Linksys extender optimizes performance by emphasizing wireless signals to connected devices. However, with all these facilities, the Linksys RE6300 extender covers the WiFi dead zone areas.

Prior to initiating the Linksys extender setup, ensure to have certain essential things. Here is a list of these

• An active WiFi connection with the password.
• A WiFi router with a WPS option if connecting through the WPS method.
• An electric power outlet.
• An ethernet cable in working condition.
• Laptop, PC, or any Mobile.

However, besides the above things, assure that your devices have these web browsers.

• Google Chrome™ 25.0 or higher
• Firefox® 20 or higher
• Internet Explorer® 8 or higher
• Safari® 5.1 for Mac® or higher

There are a number of Linksys RE6300 Setup processes available i.e. Linksys app, WPS setup, web browser setup, and an ethernet wire. You can follow any one of them according to your choice and comfort to attach the extender and the router easily. We are going to explain every single one of them including their steps in a detailed manner. Just go through the steps one by one and follow the whole process efficiently.

Let us make it clear and simple for you.

Linksys RE6300 Setup Using Web Portal

Linking by using a PC or laptop to the Linksys RE6300 WiFi extender is the primary procedure. Use any search engine from the above-listed browsers. Follow the written instructions to proceed

• First, Go into your device’s WiFi settings.
• Then, Search for a WiFi network that the extender is broadcasting.
• The network name will be by its own name.
• The XXX can be in the alphanumerical form which represents the MAC address.
• Connect your device to that network.
• Once the connection is done, search the URL http://extenderlinksys.com or the IP address 192.168.1.1 for login.
• Then the browser will bring you to the Linksys RE6300 Setup page directly.
• After that, by marking on agreed terms, click on the start setup option.
• Choose a wireless range extender and it will start searching for your WiFi networks.
• Make sure that it will show both 2.4 GHz and 5 GHz, bands.
• Lastly, Click on that network and insert the network’s password.

By following these steps, you will complete the Linksys RE6300 setup successfully.

With Ethernet Wire

Connecting with the help of an ethernet cable is another easiest way. The smart tip here is to ensure the condition and quality of the ethernet cable. The cable should not be damaged in any way. This wire is responsible for the supply of internet so it is very important that it works efficiently and effectively. Insert the first end of the cable into the extender’s ethernet port and another into the laptop’s port. Make it clear that the cable is connected properly. Thereafter, follow the web service method to do the Linksys RE6300 setup.

Linksys RE6300 Setup By the WPS Method

WiFi-protected setup is the push button process to unite the Linksys RE6300 WiFi extender with your computer, mobile, laptop or tablet whatever you are using. Use this simple process to connect both. But, make sure that your router has a WPS option. Read the written points to join them

• Insert the Linksys WiFi extender into the power plug near the router. Make sure the power plug is available for permanent use.
• Wait until the LED indicator turns from blinking green to blinking amber.
• Once the LED is stable, push the WPS button on the router first to start the Linksys RE6300 Setup.
• Then, press the WPS button on the extender within the next two minutes.
• The light indicator will turn to solid green after the Linksys RE6300 setup completion.

With Linksys App on Device

Launching the Linksys RE6300 WiFi extender smart app is another simple way to complete the process successfully.. You can install and utilize the Linksys application from the Google Play website and the Google Play Store. Follow the given directions to make the connection

For Your Laptop

• Go to the google play website page on the web browser.
• Simply search the Linksys app and install it on your device. Update your device’s software for a faster and smoother process.
• After the installation, open the app and the login page will appear on the screen.
• Click on the Login option. Click on it and you will see a login interface.
• Fill in the demanded details to log in and use the app service.
• Enter the credentials again in case of login failure.

Android Mobile Phones

• Open the Google play store on your mobile phone.
• Next, search the Linksys app and select it.
• Tap install and wait until that is done.
• Once it is done, open it and use this by putting in some basic details.

For Apple iOS Device

• Search the Linksys smart app on the Apple app store.
• Linksys app will appear on the screen.
• Click on the get button to launch the app.
• If asking for Apple ID and password fill those in and allow them to install.
• Once the installation is complete, type the required information like your email ID or the router’s password.
• Finally, grab the benefit of the Linksys RE6300 WiFi extender smart app.

You can move your extender to another place after configuration but the distance should not exceed the limit.

Although the Linksys extender setup through the app is like A Piece of Cake, users can avail of some extra advantages through this app. Here is a list of these

• You can verify the connected devices to the Linksys RE6300 WiFi extender.
• Users can grant permission to guest access through the app.
• The app will automatically block threats networks and malicious websites for safety purposes.
• You will have access to Parental control to keep track of your kids’ devices.

It can be a great idea to examine the network speed after the Linksys RE6300 Setup process. This will help to analyze the working of the Linksys RE6300 WiFi extender setup. Make use of any quickest and free browser-based speed test. Visit the speed test browser page and run the test. Verify that you are getting a considerable and promised network speed. Check the upload and download speed also by doing some tasks. Read the rest of the steps for more

• Stream the music and videos on any platform.
• Update the software of your devices.
• Add files or folders to the cloud or drive.
• Transfer the data online from your devices.
• Try different gadgets and locations as well to perform the test.

An updated firmware enables the extender to perform in its optimal state without getting any technical glitches. So, try to keep the firmware of your extender updated every time to get the best out of it. To let the process perform automatically choose and activate the Auto-Update option from the WiFi app. Alternatively, you can do it manually using these tips:

• Access the Linksys web interface of your extender on the networked PC.
• Click on the Firmware Update option to get to know the latest version.
• Download the file if there is any available for your extender model.
• Ensure the file is official and not corrupted that you downloaded.
• Then, upload the file to the required field and click again Firmware Update.
• Wait till the process is complete and finally reboot the extender.
• Now, make the connections again and check the network improvement.

There may be any kind of reason if you face any error while using the Linksys extender, Here are quick tips for troubleshooting some common issues

• The distance between the extender and router should be the least during the configuration. Make sure to place them in the same room.
• After that, you can relocate the extender with keeping within the limit.
• Verify that your router and internet are working properly.
• Check the extender’s LED indications and antennas often.
• Reset the extender if there is any need.
• Press and hold the reset button for 20 seconds, and wait till the LED starts blinking.
• Then do the Linksys RE6300 Setup process again.

To ensure you have a smooth and hassle-free time while attempting Linksys RE6300 Setup, performing the setup steps only is not enough. There are a few crucial things that you must consider and avoid doing. Or else, these common mistakes often lead to delayed and frustrating Linksys RE6300 Setup experience. The common setup mistakes include:

• Placing the Extender Far From the Host Modem
• Settling the Extender Close to the Walls
• Keeping the Electronic Gadget Near the Extender
• Forgetting to Correct the Linksys RE6300’s Antenna Position
• Connecting the Extender to the Host Modem Without Using an Ethernet Wire
• Trying So Many Hacks to Fix a Particular Linksys RE6300 Setup Issue
• Using a System That Is Affected From Malware or Viruses
• Using an Incompatible Device or Outdated Browser

While configuring your device after resetting it, keep an eye on its LED. Basically, there are two-three indications behind the Linksys RE6300 blinking green notifications. Go through these once.

• In the first place, your extender will blink green when it is starting up.
• Moreover, the WPS configuration connection is in progress.
• Lastly, at the firmware upgrading time, the extender will blink green.