Linksys Velop Node Keeps Going Offline – What To Do?
Linksys Velop is among the best products that Linksys has to offer its customers. Users have lots of positive reviews and feedback to share about this. However, at the same time, they also have complaints to share. One of those complaints is that Linksys Velop Node keeps going offline or disconnecting. In some cases, users easily fix this issue by applying some basic troubleshooting hacks, but there are times when they fail to fix it. That’s where seeking reliable technical assistance becomes crucial.
As a Linksys Velop user, if you are also experiencing the Linksys Velop Node keeps going offline, here we have a list of solutions for you. If you apply these solutions correctly, you will be able to fix the issue in minutes. However, before we start discussing this issue, let’s first explore a few similar issues.
Similar Linksys Velop Node Disconnection Issues
Linksys Velop keeps going offline is a critical issue, but there are many similar issues that users report to us. We gathered and outlined a few of those below:
Linksys Velop Connected But No Internet
Many users frequently report the “Linksys Velop connected but no internet “ issue to our team. This issue usually takes place when there is no active internet connection on your modem. However, there could be many other reasons behind this like weak internet signals or wrong placement of the device. You can fix this Linksys Velop connected but no internet issue by confirming if there is an issue with the internet supply from the backend. Contact your ISP for the same. If there is no internet connection, focus on the placement and other crucial factors.
Linksys Velop Connecting To Wrong Node
If your Linksys Velop node is connecting to the wrong node again and again, this could be due to an issue either in your primary Velop node or secondary node. Possibly, it isn’t functioning well. Another reason could be the proximity. If the secondary Velop node is placed too far from the primary node, your primary node can connect to a node that is placed close to it and is powered on. So, take care of these things to avoid Linksys Velop connecting to the wrong node issue.
Linksys Velop Not Finding Node
This is another common issue users experience with Linksys Velop devices. If your Linksys Velop not finding node, this could be due to some basic errors like a powered-off or unplugged node. First, ensure that your Velop node is correctly plugged in and powered on. Second, check other factors as well such as the placement of the device, the network name of the node, etc.
Linksys Velop Node Reset Not Working
Resetting the Linksys Velop node fixes a wide range of issues. However, sometimes, the Linksys Velop node reset stops functioning itself. Because of this, users fail to resolve the issues they often face. If you are experiencing the Linksys Velop node reset not working issues, you need to power cycle your device. If this doesn’t work, log into the Linksys web portal, navigate to the Reset settings, and then make corrections if required. This may fix the Linksys Velop node reset error.
Linksys Velop Node Not Connecting to Closest Node
If your Linksys Velop node not connecting to closest node, possibly, your secondary or child node has an issue. There could be an error with the firmware or placement of the Velop node. Other reasons include an overloaded network, network interference, and physical obstruction. Check out for these factors and ensure everything is in place perfectly to avoid the Linksys Velop node not connecting to closest node issue.
Linksys Velop Node Dropping Connection
If you encounter a Linksys Velop node dropping connection or a Linksys Velop node loose connection issue, the distance between the nodes could be the major reason. Check for the placement first. If you think the distance between your parent Velop node and child Velop node is too far, plan their placement again. If this is not the issue with your Velop device, check for other factors as well like power supply, firmware updates, network interference, objects that obstruct the signals, etc. This will most likely resolve the issue.
Common Causes of Linksys Velop Node Frequently Going Offline
Find out the list below that comprises all the possible reasons you are experiencing Linksys Velop Node connection issues. You need to identify which of these reasons are actually linked to the issue that you are facing.
Poor Placement of Linksys Velop Nodes
The placement of your Linksys Velop nodes significantly contributes to the quality of your Linksys Network. If they are placed too far from the primary Linksys node or in a space where signal strength is too low, the Velop nodes will struggle to establish a connection with the primary node. Similarly, if you install the node too close to the primary node, network overlapping and interference will happen. This will result in a loss of connection.
Interference from Other Devices
Linksys Velop Nodes are designed to communicate with other devices using radio frequencies. These frequencies travel via air before reaching another device. During the travel, if they come into contact with other radio frequencies emitted by another device like a microwave oven or baby monitors, this will result in network interruption. Because of this, your Linksys Velop node may go offline or disconnect.
Network Congestion
Network congestion means that too many devices or users are connected to a particular WiFi network simultaneously. When this happens, it leads to slow internet speed and frequent disconnection issues. This could be one of the possible reasons you are experiencing Linksys Velop Node keeps going offline. You can confirm the same by checking the number of users connected to your Linksys Velop network. Go to the network settings of your Linksys Velop to check the same.
Firmware Issues
You may already know that the firmware of any wireless WiFi device is an operating system. It needs to be in its optimal condition or else it results in a variety of different issues including the Linksys Velop Node disconnection issue. Possibly, the firmware of your Linksys Velop primary or secondary node is outdated or corrupted. You need to check if your Linksys Velop parent or child node is frequently disconnecting.
An Issue In the Hardware
Sometimes, the major reason you are continuously encountering Velop node disconnection issues is damaged hardware. It might be possible that you are using a faulty power adapter or a damaged Ethernet cable. Also, there could be an issue with the ethernet ethernet ports. In some cases, users use an old modem to connect to a Linksys Velop device that doesn’t have compatible ports. This could be another significant reason you are struggling with the Linksys Velop Node keeps going offline.
Apart from these possible reasons, there could be many other reasons why you are frequently encountering Linksys Velop disconnection issues. You need to discuss that with our technical support professionals. They can help you with detecting the exact cause behind the issue that you are facing.
Possible Solutions For Linksys Velop Node Disconnection Issue
Now that we have identified a few possible causes of the Linksys Velop Node keeps going offline, let’s find out some effective ways to get your Linksys Velop Node back up and running.
Adjust Your Linksys Velop Nodes Placement
As mentioned already in this post, the placement of your Velop nodes plays a crucial role in the speed, quality, and overall performance of your Linksys network. If they are placed improperly, you are certainly going to struggle with network speed, coverage, and performance. To ensure that your Linksys Velop nodes are in the optimal position, you should place them in central locations like in the middle of your dining hall. Also, make sure they are away from walls, metal items, and devices that emit radio frequencies. Or else, you may face the Linksys Velop node keeps going offline issue again.
Identify The Source Of Network Interference And Fix The Issue
Identify what are the objects or devices that are causing network interference. If you suspect any of the objects or devices, you should try to reduce the interference. You can do this by relocating the devices as per the manual instructions or reducing their usage to some extent. For example, you can shift your microwave oven away from the Linksys Velop nodes or switch to a different channel on your baby monitor.
Remove Unused Connections From Your Velop Network
Every Linksys Velop device comes with a different capacity. Some devices allow up to 50 connections while others allow only 20 connections. Check if there are too many connections on your Linksys Velop network. If so, then remove the connections that you do not use. This may fix the Linksys Velop node disconnection issue.
Update Linksys Velop Node Firmware
Like updating your smartphone OS, a mobile application, or a digital system is crucial for their optimal performance, updating the firmware of your Linksys Velop node in short intervals is important. You can check for firmware updates by logging into the Linksys app or website and following the instructions provided.
Preventative Measures to Avoid Linksys Velop Node Going Offline
In addition to the solutions we have explained above, there are some preventative measures for consideration. If you follow those or keep them in mind before and during dealing with your Velop nodes, you avoid Linksys Velop nodes going offline issue in the future.
