Linksys RE6400 Setup

The Linksys RE6400 WiFi extender setup is not a complicated process. However, all you need is access to a web page and a few more things. Although, users have to know some basic things in order to complete the configuration.

Let’s get started with the Linksys RE6400 Extender setup process.

Before going through the installation process, you should know the pre-requirements. The things you will need during configuration and below down is a list of these:

• A well-operated plug with electricity power.
• A working WiFi router with a web facility.
• Laptop, smartphone, and any other device having a web browser.
• Default IP address or web address.
• An ethernet cable in working condition.
• The WiFi password of the router.

To make it comfier, carry the manual guide along with you. Just go through it once.

Though, there are a few convenient ways to set the device. The first is the WPS setup process and second is the web user interface and others are via ethernet cable and Linksys app. Beneath written information will make it clear to you.

With WPS Process

The easy way to make the connection is by using the WPS option on the extender and the router. Read the below-written steps to proceed.

• Plug the Linksys WiFi extender into the power socket near the router.
• Once the power LED is stable, press the WPS button on the router.
• After a few seconds, press the WPS button on the extender.
• The lights on the both router and extender will blink for a short while.
• Within 20 seconds, the blinking will stop automatically which confirms the connection is successful.
• After that, the Linksys RE6400 WiFi extender network name will occur in the WiFi list.
• Connect the device to it and insert the same password as the router’s WiFi.

The thing here to remember is that the distance between the router and extender should be minimal.

Linksys RE6400 Setup On The Web Portal

The other foolproof method is by using the web on any device. You can join them by using any internet browser. Let me break it down and explain you

• Initially, combine the mobile phone or laptop to Linksys re6400 2.4 GHz or Linksys re6400 5 GHz network name showing in the WiFi list.
• Thereafter, search the URL Extender.linksys.com using any web browser on your device.
• You can also type the default IP address http://192.168.1.1 for login.
• Then the search engine will show you various pages but go on the Linksys extender official page.
• There you will see the setup process option.
• Click on that and type “admin” as for username and password for both.
• Select the WiFi router and insert the password.
• Finally, the Linksys re6400 WiFi extender setup process is complete.

With Ethernet Cable

You can even make the connection with the help of an ethernet cable. Insert the first end of the cable into the ethernet port of the WiFi extender and another into the laptop. Make sure that the cable is working properly. After doing this, follow the web service method to do the setup.

By Installing Linksys App on Device

You can launch the Linksys application on their devices from Google play store and Google play website for connection. The interesting fact is that installation can be done without any cost. Utilize the down written information for your queries

For Your Android phone

• Open the Google Playstore on your mobile phone.
• Search the Linksys app and select it.
• Tap install and wait until that is done.
• Once it is done, open it and use this by putting the basic details.

For Your Computer

• Go to the google play website on your computer’s browser.
• Do the search for Linksys app and tap to install it.
• Allow your device to install it.
• After the completion of the process, fill the demanding information and avail the service.

In case you are facing some problems while using the Linksys WiFi extender. Just follow certain troubleshooting ways to sort out the issue.

• Make it clear that your WiFi extender and router are connected properly.
• Place the extender close to the router and in the proper position.
• Check the internet of the device.
• Keep the extender’s antennas in a vertical standing position.
• If it’s still not working then opt for the reset function.
• Press the reset button for at least five seconds and wait until the led starts blinking.
• Once the reset is done, do the setup process again.

After utilizing the above-mentioned steps, if you are still encountering the Linksys RE6400 Blinking Orange Issue, it means its firmware is malfunctioning. So, update the extender’s firmware to fix this issue. Visit the extender’s default web-based setup page and download the latest file from there. Afterward, upload that file there and let the extender perform the updating process.

Basically, the Linksys RE6400 WiFi extender works to strengthen the internet connection. It acts as a booster to cover the WiFi dead zone area. The powerful 802.11 AC network operates on 2.4 GHz and 5 GHz bands. Thus, provides up to 1.2Gbps WiFi speed without any obstacles.

There will be distinct LED light indicators on the WiFi extender having different purposes. The blinks of the light will show you dissimilar notifications. Let’s go through those signs

• The main light on the top of the extender shows that either the extender is on or off.
• The solid green light indicates that the extender is working with good signal strength.
• Blinking green means it’s booting up or the firmware is updating.
• Blinking orange will notify you that the extender’s firmware is not working well.

Analyze these light indications often to keep the extender and the router connecting.