Linksys Velop Red Light No Internet Issue: How To Fix It?
The popularity and number of mesh setup users are increasing as time flows, and fortunately, Linksys Velop is becoming preferable. The Linksys velop’s cutting-edge features and easy-to-setup and usage processes make users satisfied. However, similar to other wireless devices, the problem can arise in velop, like the Linksys velop red light on it in some cases due to some technical errors.
Also, resolving that error can be more frustrating until you recognize the source of the error. As it is crucial to stay connected to the internet every time, but for that, the Velop’s perfect working is necessary also. But, don’t worry as this blog covers the possible causes and relevant solutions for them. These solutions will answer your Linksys velop red light no internet issue: how to fix it a question.
Some Possible And Common Errors
The most probability the Linksys Velop solid red light occurs when there is no internet connection in the parent node. On the contrary, Linksys velop blinking red issue comes when nodes are not in range together. Also, there can be a number of additional reasons which can contribute to creating this error. Go through them once and try the solutions one by one until you get the issue fixed.
Linksys Nodes Not Connecting
The common reason behind this issue can be weak connectivity between the parent and child nodes. Maybe the parent and child nodes are placed far away and the distance between them is maximum. Apart from that, the ethernet wire you are using to make a connection is broken from between. As a result, that wire is not capable to transfer the Velop signals. If these are the possible reasons then you will surely get the Linksys node blinking red error.
But, to get that condition fixed, check and reduce the distance between both nodes. In fact, try to find the best placement for both through the Linksys Smart WiFi app. Select the Spot Finder option and get the best location suggestion for your mesh setup. In another case, verify the ethernet and power cables if these are working well or not. If these are having any signs of tear or wear, try replacing them with the latest ones. Doing so will help you to resolve the Linksys node blinking red issue for sure in the quickest way.
Linksys Velop Connected But No Internet
In case you face Linksys Velop solid red light sign on the Velop’s panel then there can be a possibility of no internet situation. But, this situation arises when there is no internet service from your internet service provider. Or you just missed the internet bills and the internet plan is expired. In addition, your WiFi device might have a technical error from its back end for a short period of time.
In this condition, try to contact your internet service provider to confirm the active internet plan. But, before playing this blame game, make sure your wireless device is in working condition. Later, get the internet plan’s confirmation from your ISP and update it to a new one if you have excessive requirements for the internet. Alternatively, wait for some to get that temporary technical error clear and later check whether the Linksys Velop solid red light issue is fixed or not.
Linksys App Not Showing Nodes
The other common reason behind the Linksys Velop solid red light is that the Linksys WiFi app is not showing nodes. That case may be like you configured the Linksys Velop but the other nodes are not visible in the app list. There might be a chance that the cables are broken in the connection. This is why the Linksys child nodes are unable to attach to the parent node and are not appearing in the app. To get this clear, replace the wires and use those that come in the Velop’s packed box.
Besides that, the Linksys app you are using right now can be outdated or not the official one. Because the problem can be in the Linksys app instead of the Linksys Velop. So, go to the device’s app store and verify the app and its version as well. If there is any availability of the updates, then install that immediately but ensure to choose the official version this time. Afterward, look for the Linksys node red light error as it must be turned into its actual state now.
After doing this if the issue is not resolved then, you might perform the Velop setup process with its inaccurate details and in a faulty way. So, check the velop’s settings from the web management portal or on the WiFi app. If there is any blunder mistake then you will require to reconfigure the Velop after resetting it. That process will surely work for your Linksys node red light error if none of the above-mentioned works.
Reset The Linksys Velop
To bring the Velop to its default state, reset it using the web management page or the reset button from its bottom panel. This method will help you to discard the previously installed settings and the Linksys Velop solid red light error as well. Choose any reset process from two options.
Reset From Management Portal
In this reset process, go to Velop’s web management window by logging into it. Then, choose the wireless settings and click on the Restore And Backup option. There you will see the Factory Default option, through which you can carry out the process by only tapping on it. But, make sure to collect the Velop login and other information before doing the process.
Press The Reset Button From Velop
On the other hand, push the reset button and hold it for almost 8-10 seconds. The blinking light will notify you about the ongoing reset process. After waiting for some time, the light will become stable and there will be a requirement to install it again. Lastly, reinstall the Velop from the web-based setup portal or by using the Linksys WiFi app and the Linksys Velop red light issue will resolve now.
Linksys Velop Red Light After Reset
Unfortunately, if the error still persists even after resetting the Velop, then check for its Firmware version. If you have recently updated the Firmware version then there can be defects in the firmware file or the version is not matching exactly to your device. It is also possible that the automatic WAN port detection feature is disabled in the parent node which causes the Linksys node red light issue.
After updating the firmware, when you set up the ethernet ports with the internet connection, that connected port to the modem turns into a WAN port. Whereas, the other one becomes a LAN port. But, while doing this, if you plug in the wires to the wrong ports then there will be no connection for sure. In this condition, you will require to remove the cables from the ports and connect them again to the right ports. Hence, the Linksys node red light issue will be fixed now.
Additional Tips to Fix Linksys Velop Red Light No Internet Issue
Apart from all the options we have provided to you above, there are some practical ways to fix this issue. Below are those:
Ask Neighbors or Relatives Who Use the Linksys Velop Network
Linksys Velop is a popular wireless WiFi network solution so there is a very high possibility that many people around you including your neighbors and relatives will be using the Linksys Velop device. And possibly they will be familiar with the issue you are experiencing. So, do not hesitate to ask them. They may assist you in some way. However, here, you need to make sure that the person you are getting help from has the right capabilities to deal with the Velop Red Light No Internet problem.
Get Assistance From the Internet
The internet is flooded with practical and useful information and guides like the one you are reading. If you are struggling to find a solution for the issue, we would strongly suggest you search for the same over the internet. You may find written guides, videos, or infographics on the same. Those contents will certainly help you get the job done.
Update The Firmware
However, your issue will be resolved in these ways but is equally important to make the firmware version the latest one. As this process will help you to get the velop’s optimized performance without getting the Linksys velop blinking red problem again. To accomplish this process, go to Velop’s web management page and look for the updates there. If there is any available, then download that file on your PC and execute the updation process from there. After doing this, it is advisable to reboot the Velop once and make the connections again.
Therefore, you will succeed in removing the Linksys velop blinking red issue with the help of these troubleshooting tips. If the red light still keeps occurring then, you will require to get in touch with our technical expert for more help. Their proper guidance will surely let you get the light in ideal condition.