Linksys Velop Port Forwarding Not Working

Live Chat

Live Chat with our experts & get real-time answers to all your queries.

Any Query?

Call Us to discuss your Linksys issues with our experts and get the solution.

What To Do When Linksys Velop Port Forwarding Not Working?

Is Linksys port forwarding not working while accessing your PC files or folders from your other network? You do not need to sit and wonder about the issue as we are going to help you with this. Although the setup process of Linksys’ Velop port forward is effortless, you may face hurdles in its working. It may be difficult for you to identify the reason behind this as you are not a tech person, but through our troubleshooting tips, you can discover the causes and fix the issue easily. So, do not worry as we will assist you throughout the whole process and provide all the information on potential fixes on this page.

Verify Some Common Things

It is a very common human tendency that we try to fix things on our own before asking for help or researching the problem. So, here are some tips for your exploration before taking the troubleshooting steps. Utilize these pointers to make sure every prerequisite need is fulfilled efficiently.

First, ensure that your internet service provider gives access to the public address for you to connect a new device.
Then, check the Velop IP address and it must be accurate for the successful setup and uninterrupted working of the device.
Sometimes, the firewall in your system blocks this feature automatically. So, customize the settings of your firewall.
Moreover, there may be any mistakes or changes in the settings when you are performing the configuration process.
The electromagnetic machines interrupt the Velop’s working. As a result, your Velop is not able to provide port forwarding access.
VPN and other extensions can also be the reason for this issue. Try removing them.
Check the settings if you have enabled the port forwarding feature or not.
Lastly, the Linksys Velop may contain the same port in one port forwarding term.

Thus, analyze all these points thoroughly to recognize and fix the Velop port forwarding not working issue.

Plug Off Your Linksys Velop And Connect It Again

The first and foremost point here is to switch off your Velop and the existing router too. Remove both of them from the power sockets and disconnect your device whether it is connected through a wireless or wired connection.

Connect them again and proceed accordingly. Always keep in mind that the perfect customization of settings is the base of excellent working of any technical gadget. So. you are advised to check every option thoroughly and not experiment with any of the options that you do not know about. Now, use your connected device and visit the web-based setup page to check whether the Linksys port forwarding not working issue is still there.

Two Types of Port Forwarding Processes

Linksys Velop Port Forwarding can be conducted in two different ways. The first way is Single Port Forwarding and the second way is Port Range Forwarding. Basically, Port Forwarding is a feature or process that lets the data go through the firewall of the gateway. This is basically done to let your Velop device know that one particular port is dedicated to specifically requested data. This is an important procedure for the safety and smooth running of your Linksys Velop network.

The two types of Linksys Velop Port Forwarding process include:

Single Port Forwarding

Single Port Forwarding lets the users set up certain public services like FTP, Email Servers, and other internet applications one by one on the Velop Network. In this process, users are required to first assign static IP addresses to devices that will be in use.

Port Range Forwarding

Port Range Forwarding is a little different from Single Port Forwarding. This type of Port Forward allows users to set up public services in a group. This means you can set a range of ports in your Velop network in one go. Here, one thing to note is that certain internet applications require specific ports to open. So, you need to take care of this aspect as well.

Fill In The Velop’s Correct Default IP Address

Probably you may use or insert the incorrect IP address in the Velop’s settings or in the wrong field. The thing here is that internet IP and local IP are different for both. So, go to the Linksys Velop setup page after logging in and visit the status page.

On the next on-screen page, check the IP address and fill in the correct one if there are any changes in the address. Apart from that, examine the default gateway of the velop on the same page.

Disable The Firewall Option On The PC

Besides that, if you are using an antivirus on your computer, then it is completely obvious that the firewall is on. Basically, this function does not allow other networks to access the computer’s files for security purposes. Although this feature is beneficial, you may find the velop port not working issue due to this option.

In order to fix this, open the antivirus software on your PC and select the firewall tab. Thereafter, turn off this feature temporarily so that you can access your PC on another network. More than that, check that your velop is containing this function or not. If it is, then disable it also for a few minutes. In this way, the velop port not working problem will be solved surely and you will be able to use this.

Reset The Linksys Velop To Default Settings

Another method to solve the Velop port not working is to reboot your Velop device. Disconnect your devices from the Velop and try these methods.

After disconnecting the Velop, find the reset button on it.
Push that button for a few seconds till the LED on the Velop changes.
Now, let the Velop perform this process and make the default settings.
After resetting your Velop, you will need to do the Velop port setup again.
This may resolve the Linksys port forwarding not working issue

troubleshooting using linksys velop wifi mesh setup

Setup The Linksys Velop Port Forwarding

You can execute this process on the web-based setup page on your device’s browser. Take the Velop’s default IP address and start the process later.

First, Open any web browser on your network-connected device. Make sure the device and the web browser, both are updated.
Then, visit Velop’s web interface by inserting the web address or IP address in the search panel.
Afterward, go to the Velop’s settings and click on the Security option.
In the next step, tap on the Apps and Game tab and then Single Port Forwarding.
Select the “Add a new port forwarding” tab and fill in the required details.
Fill in the App name, IP address, and external and internal ports there.
Finally, click on the save and apply options to complete the procedure.

Note: On that page, you can also do the setup for a number of ranges of ports asides from the single port forwarding.

Connect to Our Technical Experts For the Assistance

The above information and troubleshooting guide may or may not help you fix the Linksys Velop Port Forwarding Not Working issue. However, if the above information does not help you fix the port forwarding issue, our remote technical support experts are there for you. They have immense knowledge and expertise in the troubleshooting field. Also, they have assisted several Linksys users with their complex queries and issues. So, if you fail to resolve the Linksys Velop Port Forwarding Not Working issue, just approach our team. Our team works 24/7 for your convenience. So. you can call us or chat with us anytime. We assure you that we will provide you with the best and most satisfying solutions.

If you are facing any issues then please contact us, and we will be happy to help you.

Linksys Customer Service