Can I Use 2 Linksys Range Extenders

In large or multiple-floor buildings, the speed of the internet might be sluggish frequently. There may be a need to install a Linksys range extender or add an extra extender to the already installed one. Fortunately, you can connect many extenders to the existing router. Interestingly, in this article, you will get the relevant answers to your “Can I Use 2 Linksys Range Extenders” query. So, go through this information and use it carefully.

Few Consideration Points

Prior to starting the connection process, have a look over some necessary points to execute the process hassle-free. Read these tips separately.

Use Different Channels For Both Extenders

To begin with, the first Keep In Mind point is to use distinct WiFi channels for your different extenders. For instance, if your extender is using a channel from 1, 6, or 11. Then, the channel for your new extender must be different or not be matched with the used one. Otherwise, it may cause interference or interrupt the network.

Make Different SSID Name

Apart from that, don’t use the same WiFi name network for both extenders while configuring the new extender. As it may cause IP conflicts as a result, there will be the occurrence of issues in DNS. To avoid these conditions, try to make and use different SSID networks for each extender.

Disconnect The Attached Extenders

While configuring or adding a new extender to the network, unplug and remove the existing extenders from the power socket. In addition, discard all connections from the devices whether they are wired or wireless. Once the new extender is installed, you can plug that old extender into a power outlet to use both.

Thus, these are some useful points for your “Can I Use 2 Linksys Range Extender” confusion. Now, let’s move to the further steps.

Configure The Linksys Extender

After analyzing and following the above-mentioned steps, install the extender by choosing any method from the different processes.

Through WPS Button

The easiest and quickest approach to do this is through the WPS function. However, your router must have a well-functioning WPS button on it.

• Initially, unplug the configured extender and plugin the extender that you want to install now.
• When the extender’s LED starts blinking, move to the next step.
• Press the extender’s WPS button for a few seconds and verify the LED color.
• Later, softly push the router’s WPS button within the next two minutes.
• Check constantly both device LEDs and let them make the connection.
• After a few minutes, these lights will become solid and stable and indicate that the connection is complete.
• In the end, plug-in the extender that you removed earlier and enjoy the highest internet speed.

On The Web-Based Setup Page

Besides that approach, you can visit the extender’s web-based setup page to install your device. Use your device and connect it, in order to visit the web-based setup page.

• Plug the extender into a power outlet after unplugging the first one.
• Next, connect your device to the extender’s network from the network list.
• In case you are using a PC, try to make a wired connection through an ethernet wire.
• As your device will get a strong and secure signal by doing this.
• Once the device is connected, open any web browser on it.
• Insert the extender’s default web or IP address in the browser’s search bar.
• The extender’s default web address is extender.linksys.com whereas the IP address is 192.168.1.1.
• Further, the extender login page will display on the device’s screen.
• Enter the login credentials in the required field and click enter.
• In the next step, choose the connection type that is wired or wireless.
• Following this, click enter and start the Setup Process there.
• Finally, your Linksys extender is configured and ready to use now.

Thereafter, plug in and relocate both extenders where you want to get a stable internet connection.

By Linksys Smart App

Aside from these two methods, you can install the Linksys smart app on your device to execute this process. Follow these points step wise.

• Once the extender becomes ready to install, use your device to proceed with the further process.
• Open the Google Play Store on your android mobile and search Linksys App in the search panel.
• On the other hand, get this app from the Apple App Store on an iOS device.
• Make sure to install the right Linksys app and that must be the latest version.
• Open that app after installing it and mark the agreement on its terms and conditions.
• After that, insert the Login details and click enter.
• Later, use the on-screen instructions to finish the process easily.
• Now, choose the network in the app that you want to extend and fill in the network’s password.

Note: Installation of the extender through the Linksys app will make the next process simple for you. Also, you will be able to monitor your both extenders through the app and their usage as well.

Furthermore, it will allow you to access the guest and parent control for the extenders and show the connected devices list. More than that, you can run the speed test in the app to check both devices’ working and performance too.

We hope that you will get some reliable solutions for your can I use 2 Linksys range extenders question. Moreover, you will be able to configure and use your two Linksys extenders at the same time. In case, you get any hurdles in the path, reach us freely.