Having a wifi range extender is quite crucial for today’s vast networking needs. When it comes to effective eradication of wifi dead zones and wider wifi coverage none can beat Linksys RE6500. You can easily setup Linksys extender re6500 using various methods. So in this particular blog-post we’ll be listing the setup steps for each method. You can decide to follow the one that you find easier. The wifi range extender works in collaboration with the existing router. Its task is to wave off all the dead zones, to strengthen wifi signals and to offer complete connectivity in every nook of your abode. So without further deferment, let’s unveil the installation methods.
Setup Linksys Extender RE6500 via WPS
The easiest and the quick method through which you can complete the Linksys re6500 setup is by using the Wifi protected setup button. The accurate steps for it are as follows:
Keep the RE6500 device in a close proximity to the router. Now attach its antennas to it. Thereafter, plug the power wire into it and then move the adapter into the power outlet. Press the power button towards ON.
Initially the front panel light of RE6500 will blink. You can setup Linksys extender re6500 only when its power indicator turns solid white. Because it indicates the completion of the booting process.
Now press the WPS button on the router. Its WPS indicator should flutter.
Thereafter, without wasting even a single second, push the WPS button of the RE6500 extender. When the WPS function enables, the extender starts blinking white light.
So you have to now wait for the setup to complete. When the setup completes, the indicator turns solid white. But if it blinks amber continuously then it means the setup has failed. So you need to try it again. If your router supports dual frequency bands, then just repeat the above written setup steps once again for activation of the other band.
Once you successfully finish the setup, you have to relocate the extender. Place it in between the router and the area with slow or no wifi connectivity. Power it on and it will automatically sync with the router. Make sure the chosen spot is able to fetch at least 50 percent signals from the host that is the router.
Setup Linksys Extender RE6500 Via Web Browser
Yet another setup option is using a web browser. This method allows the user to have more control on the extender. The exact steps for it are as follows:
First disconnect the existing wifi range extender if you have any.
Next prepare the device for the setup. For this first attach the antennas to the extender. Keep the antennas upright for the best results.
Thereafter, plot the extender in an area which receives 50 percent signals from the router and is also close to the wifi dead spot. Once placed, take the power adapter and use it to turn on the setup Linksys extender RE6500.
Now let the extender turn on properly. It is ready for the setup when it shows a stable white light.
It’s time to grab a smart device. Enable its wifi by visiting the settings. Thereafter, from the list of available networks choose the SSID- Linksys extender setup_XXXX. With that tap on Connect.
Move ahead and on the same device launch a web browser like chrome, safari, internet explorer or others that works well.
Head towards the URL field. Type extender.linksys.com and click Enter. As an alternative you can also use the IP address. For Linksys extenders it is 192.168.1.1.
Finally, for completing the setup process follow the directions that the interface shows on the device’s screen.
Setup Linksys Extender RE6500 Via Extender’s PIN
Still want an alternative setup method for your Linksys RE6500 wifi range extender? If yes, then extender’s PIN can also help you with the same. The product for it is as follows:
First with the help of the power adapter activate the wifi extender. Now open the Wifi protected setup screen of your router on the computer system or any smart device of your choice. Therefore, note down the extender’s PIN. You can easily find it on the product label which is pasted at the bottom of the extender. Additionally, you can search for it in the user manual. Now on the screen fill up this noted PIN and click on register. When the connection between the router and the RE6500 is successful, the indicator will turn stable white. Now you just have to click on Ok and close the wifi protected setup screen.
For any other query or in case you require assistance for the setup, feel free to connect to the experts. The experts are available 24/7 for your help.
Disclaimer:- linksys-wifi.com is an online platform where we address different issues related to Linksys extenders and routers. We operate independently and we do not have any sort of accreditation with any manufacturer or third-party brand. The product images, illustrations, brand names, logos, and trademarks used on this page are only for informational and referential purposes. We provide our services only on users’ demand.
