Way to Conduct the Linksys Velop Setup Easily Using the App
There are primarily two techniques available for configuring your Linksys Velop mesh system; they include doing it through the Linksys smart app or doing so without the app. You will need to use both your device and the Velop network, along with its login credentials. This is to complete either of these operations. The first method, obtain the Linksys smart WiFi app from the app store. You can then install it on the device you want to connect to the network. Then, proceed with the process by following the on-screen instructions provided by the app. Make sure that you install the most recent and official version of the software. This will help proceed with the process without any problems.
Setup of Linksys Velop Done Through the Linksys Smart WiFi App
You may conduct Linksys Velop Setup by downloading and installing the Linksys Smart WiFi app on the device you’re using. Go to the Google Play Store, and if you are using an iOS device, open the Apple App Store. Doing so will make this process much simpler. The next step is to look for the Linksys WiFi app and select the appropriate one to install. Due to the length of time required for the installation process, it is recommended that a second node be connected to the parent node of the Linksys Velop setup. Additionally, make sure that you let the application open on your phone. And enter your Apple ID when required.
Launch the application once the process of installing has been finished. Then simply click the checkboxes next to the terms and conditions. As a direct consequence of this action, the Linksys Velop setup app login window will appear on the screen of the device. In addition, the login box requires a username and password, both of which should be entered before clicking the Login button.
Make sure that these specifics are included in the correct format. In addition, navigate to the configuration page and choose the Linksys Velop network whose settings you wish to modify. If setting up a password for the network is required, do so now, and the process of setting it up will be finished in a short while. Additionally, the Linksys app allows you to monitor and administer the Velop network.
Setting Up Linksys Velop Without Using the App
On the other hand, to complete the second phase, which is the Linksys Velop setup without the use of an app, you will need to have a web browser installed on the device that is connected to the network. As soon as the web browser opens, you should search for the Linksys default web or IP address in the field provided for that purpose. After you have visited the login page, you will need to fill in the field with your username and password. You need to do this before proceeding to the setup portal. In the meantime, use the ethernet lines to connect the other satellites to the main node of the Linksys Velop system.
Following that, choose the Linksys Velop network from the list. Then enter the password, and select the Extend option from the drop-down menu. As a consequence of this, the message “Linksys Velop configured” will show up on the screen.
