Linksys Velop Setup Guide: Mesh WiFi Setup Made Simple

Uninterrupted wifi connectivity at every step of our way is no longer a luxury. All thanks to the Linksys mesh system. Unlike traditional routers that don’t provide wider connectivity and high speed connection, the Linksys Velop turns out to be a game changer. Linksys Velop system comes with a parent node and child nodes for increasing the coverage area. Due to this combination users get seamless connectivity all around the area. Therefore as a result the dead zones, lag and buffering issue, slow speed and various other problems go off completely. But to make the best use of the Velop system, accurate configuration is non-negotiable. So to perform the same, this guide will serve as a helping hand.

Setup Essentials 

For conducting a hassle free and smooth velop system setup, first pre-collect the essentials for it. These essentials are:

• A modem with active internet connection.
• Most important is your Linksys Velop Router and additional nodes if any. 
• Power adapter for each node.
• An Ethernet cable that will build a connection between the modem and the Velop system.
• A vacant and properly working power outlet.
• Thereafter a wifi enabled smart device. Pick any from your collection like smartphone, laptop, computer system, iPad. 
• Lastly, keep the user manual by your side. As it contains every little information as well as troubleshooting steps. So in case during the setup, you face any difficulty so it can serve as a rescuer.

Setup Guidance 

No matter if you are a beginner, you’ll be able to complete the setup as it is extremely simple and straightforward. 

✓ Install Linksys Application 

To start off with the setup, first take your smart device. If you already have a Linksys application on it, then make sure you update it to the latest version and only then pursue the next step. But if you do not have it on your device, then fetch it from any of the platforms. One is the Google Play Store. Other is the App Store. Be mindful, you need to install the authentic app. To download the application, you can also scan a QR code which is given in the quick user manual. After a successful installation, new users need to create their account first. Whereas those who are already using it, just need to put in the accurate login credentials. 

✓ Connect Hardware 

Moving further, it’s time to power up the Linksys Velop mesh wifi system. To do so, first place the parent node in close proximity to the modem. Check the surroundings, there shouldn’t be any electrical or metal object that can interfere with the connectivity. Additionally, ensure there is no obstacle in between the modem and the main node. Now first disconnect the existing router if any. Thereafter reboot the modem. To reboot follow three simple steps that are unplug, hold on for a minute, replug. 

Now, activate the main node. Use the given adapter for the same. Here the game is of patience now. You need to hold on, until the velop node turns up completely. This indication you get from the power LED, as it solidifies when the Velop system is set for the further configuration. 

As the velop system is now active, you need to ensure your smart device’s connectivity to its default wifi network. For this activate the wifi of your device by visiting wifi settings. Find out the wifi network of your Velop system. Connect to it. If it prompts you to give in password, grab the same from the Velop’s user manual. Although it is also scribed on one of panels of the main Velop unit.

✓ Follow Setup Prompts 

Finally launch the app. Now if you are using an android device you’ll get the option of Launch Setup. Tap on it to Continue. iOS users tap on Set Up A New Wifi Network. 

In the next step select the Velop and Mesh Routers option. Finally, now the application will start providing you prompts that you need to follow. Abide by the instructions carefully and finish the Linksys Velop mesh wifi system setup. As the setup completes, you’ll see a solid white light that means the node is set up and it’s online. 

Now to expand the coverage area, you need to power up the child nodes. Place these nodes strategically, throughout your abode. But keep in mind they should be within the range of the main node. As for the proper working of them, communication is essential with the main router. Using their specific power adapters, activate each of them. Let the LED on top panel solidify. Thereafter return back to the app, and you’ll see the app automatically asks you to name each node and finalize the setup. 

Before finalizing, we recommend you to look for pending updates. If any then install them. As it will amp up your overall networking experience and will also secure your network from third party access. Additionally, configure other settings. Like enabling security encryptions, creating a guest network, maximizing the use of parental control features and much more. The app dashboard makes it easy to monitor who’s connected, check signal strength, and test internet speed directly through your mesh network. After the configuration review your changes and tap on Save and Apply option before logging out of the application.

Enjoy Seamless Connectivity All Around 

As the Linksys Velop mesh wifi system setup completes, you can connect your smart gadgets and enjoy lag free wifi connection. In case of any problem with the signals in a certain area, then try repositioning the velop nodes. It’s an expert recommendation, to place the networking device like Velop system in an open space that offers complete ventilation. Additionally, placing the main node on some higher surface will turn out to be more favourable. In case of any other issue, do not forget to look for the solution into the user manual. 

Further if you need assistance with the setup or have any query then feel free to connect with the experts.