Linksys Extender Setup RE6400: Strengthen Network Signals

Linksys Extender Setup RE6400 is a dual band wireless network device that helps you boost your signals up to 7500 sq.ft. You can easily add this device to your home networking system or office networking system if your router device is not enough to provide coverage across your space. With the appropriate information on the setup process you can do it very quickly. By reading the next segment of this article you can gather the necessary information which will help you in configuring the device. 

Installation Of Device

It is very significant to properly install the range Extender device hardware to perform the Linksys Extender Setup RE6400. By following these steps you can install your range Extender hardware:

• Carefully unbox your range Extender device and take it out of the packaging. 
• Now start hunting for a place for keeping the device. You can keep your range Extender closer to the host router device during the initial setup. After the configuration you can relocate the device to boost the network performance. 
• It’s time to power up the device by connecting it with the power source. If you are using an arre 6400 model then you don’t need a separate location to put the device, you can directly install it on the wall socket. 
• Turn on the power supply and wait for the device to start.

Configuration Of Device

Linksys Extender Setup RE6400 can be done using the WPS method or using a web based method. If you choose the WPS method then you have to verify that your router supports WPS connection. If you decide to proceed with WPS connection then you have to press the WPS button on both the devices within 2 minutes and let them connect with each other. On the other hand if you decide to proceed with a web based set up then you have to follow the following steps. You have to make one thing clear in your mind that WPS setup doesn’t allow you to customize your network whereas web based methods allow. 

• Use a client device of your choice and connect it with the extender network. 
• Open a web browser and go to extender.linksys.com page.
• To open the setup page you can use IP instead of web address. 
• Enter the standard login credentials to get access to the page. 
• Thereafter connect the device with the router by choosing the router’s network name. 
• Enter the password of the router and then make the changes in the other network settings. 
• Must replace the standard wireless network name and password. 
• Also update the firmware and submit the changes you have done. 
• Relocate the extender device to boost the network.

Connect Us

Linksys Extender Setup RE6400 specified above breaks into a simple to understand process. If you face difficulty even after following the above specified process then you need technical help. Communicate our technical expert on below available numbers or drop a message in the life chat box.