Linksys Extender RE6400 Setup: Guide You Need

People often have WiFi dead zones or no network area and their home or office with the setup of a single router device. If you are also one of those who are experiencing trouble in their networking system then the information is very valuable for you. A range Extender device can resolve the issue you are facing. There are several range extender devices available in the market out of which Linksys range extender devices are very popular. You can easily use these extender devices to extend your existing network. Linksys Extender RE6400 Setup is also a simple task that can be performed by even a person who is not tech savvy. With the further given instructions you can easily perform the setup. 

Installation

Prior to initiating the Linksys Extender RE6400 Setup you need to install the hardware of the device. Hardware installation of linksys extender involves following steps:

• Look for the placement to keep the extender. 
• You don’t need a separate location as it is a wall plug device. 
• Look for the wall plug closer to your router device.
• Connect the extender to the wall plug. 
• Power up the extender device by turning on the switch. 
• Wait for the LED on the device to stabilize. 

Web setup

Linksys Extender RE6400 Setup using web interface method is so simple. This setup method allows you to make several configurations as per your requirement. You can customise your network using this setup method: 

• First of all choose a client device. 
• After that connect it with your extender network. 
• Next, launch a web browser like Google Chrome, Microsoft Edge, Mozilla Firefox or any other.
• In the URL bar specify the web address. 
• Instead of a web address you can also use an IP address. 
• Enter the standard login details to get access to the dashboard. 
• Choose the language and proceed further by selecting the name of your routers network 
• Enter your router’s password and then change the standard login credentials of your re6400 device.
• Save all the changes done by you and let the device boot up again.

WPS Setup

You can also perform set up of the device using the WPS method. WPS based configuration is super easy. In this connection method you need to locate the WPS button on both the devices. Before proceeding, make sure your router device supports the WPS connection. Push the WPS button on the extender following which pushes the button on the router within 2 minutes. Monitor the device LED and confirm the success or failure when the process is done.

Connect Us

Linksys Extender RE6400 Setup process using both the methods is very clearly mentioned above. In case you face any trouble you make contact with our experts. Our team will guide you and help you in completing the configuration. They will also help you in detecting the issue you are facing and resolving it. You just need to make a call to our team on the below available number. Hurry, call now!