How to Setup Your Linksys WiFi Extender

The most significant element in everyone’s life is the Internet.To access high-speed internet, consumers employ a variety of wireless devices at their locations. To spread signals throughout the area, a WiFi extender is the ideal choice. However, setup errors frequently lead consumers to have slow internet, therefore in this article we’ll go over how to install a Linksys wifi extender.

Use Ethernet Cable

The best and simplest way to install a router or extension is via an Ethernet wire. Check your extender’s internet ports first. Thus, when setting up a Linksys extender, connect your router and extender using an Ethernet connection. Make sure the extender and router are properly connected. Your devices won’t be able to receive internet signals if they can’t connect. Every smartphone and laptop has a signal bar; therefore, after connecting the devices, verify wifi signals. The extender port and either point of the device are connected via one port of the Ethernet cable.

WiFi Extender Installation

• All of the necessary components for installing a Linksys wifi extender are included. Simply open the package and take the actions listed below.
• Installing the plug-and-play Linksys wifi extender just takes a short while.
• Your router has an integrated antenna, so you won’t need to run a separate line from it to your home.
• To simply connect it to electricity, use the built-in wall adapter or the USB port on the back of the device’s housing.
• Connect it to a network switch or router’s Ethernet port.
• All you have to do is visit extender.linksys.com after connecting and follow the straightforward Linksys Extender setup instructions.

Connect The Extender Using The WPS Button

Connect the power to your Linksys wifi range extender. Make sure to place your extension in the same space as your existing router. You can relocate your extension far from the router once it has been configured.

Push the WPS button on your Linksys wireless range extender after pressing the WPS button on your host router. You have two minutes after pressing the WPS button on your router to press the WPS button on your range extender.

Wait two minutes after pushing the WPS buttons on your extension and router. After that, check your range extender’s LED light. If the LED flashes a solid green color, your extension and router are effectively connected. Your devices can now receive wireless signals at your location.

If your LED light remains solid red after two minutes, your WPS process has failed. Therefore, you must reset your gadgets once more. Therefore, you can carry out the method once more or more times. So repeat the previous steps.

After completing all the steps, you can position your range extender so that your devices can receive signals across your home or office. Ensure that the LED light is entirely green. You can now relax and use your high-speed internet. because after it has been set up, your wireless extender may transmit wifi signals all throughout the house.

You don’t need to repeat the installation procedure after moving your extender. It will automatically reconnect with you and plug it back in after it is finished.