Linksys provides its users with an ample number of options when it comes to range extenders. RE6700 signal repeater is one such masterpiece that is gaining immense appreciation in the networking market. To know the reasons why, you need to check out its features that are written in the next head. So in this blog post we’ll be sharing the two easy Linksys re6700 setup methods. The guide is kept simple and straightforward so that every individual can set the device up, without calling for any expert assistance.
Linksys RE6700 Extender Setup Features
RE6700 is a wifi signal repeater. It extends the wireless range of your existing router. The gadget comes with so many amazing features:
First the re6700 operates on dual frequency bands. The 2.4Ghz band provides wider coverage. The 5Ghz band offers higher speeds.
Next the re6700 features a direct plug-in design with an additional built-in outlet on its front panel.
Thereafter, its cross-band technology alongside beamforming technology makes it worth spending every single penny.
To be precise the re6700 wifi signal repeater provides coverage to an area of 10,000 sq.ft.
Moving further, the best part about Linksys re6700 setup is that you can use it in two different modes. As it can work in both access point mode and repeater mode as well.
The front panel LED indicator helps you easily understand the exact working of the re6700.
For any networking device to work best to its abilities, the placement plays a crucial role. Often users find this a difficult task. But with Linksys re6700’s spot finder technology, you need not worry about the same.
What Are The Setup Requirements ?
Now as you are familiar with the feature set of re6700, lets now check out the Linksys re6700 setup requirements:
First and most important is the working wifi network and its details.
Next you need an empty AC power socket.
Thereafter, an Ethernet cable.
Then comes a wifi enabled smart device.
Lastly, keep the Linksys re6700 manual by your side for fetching default setup details.
Linksys RE6700 Extender Setup Guidance
First we’ll be sharing the setup details for the most used setup method that is done using a web browser.
Initiate the setup by plotting the device strategically. Try finding the middle spot between the router and the area of concern.
Next move the repeater into an AC electrical socket. Turn it on.
Do not move further, until the front panel LED indicator turns green.
Now grab a smart device. First connect it to the RE6700. For stable connection make use of Ethernet wire. Whereas if you do not want any wiring hassle then use wireless details. The details are given in the Linksys re6700 manual as well as written on the RE6700’s back panel.
Finally, open up an internet browser. You can go with Google Chrome, internet explorer, firefox and safari as well. To eliminate any upcoming problem, try clearing the browser caches folder.
Tap on Start Setup. Put up a password. Choose one mode. Thereafter complete the Linksys re6700 setup by fulfilling the directions as they appear on the screen.
Note: Before closing the setup interface, head towards the Firmware Upgrade section to look for the pending updates. If found, install it down without wasting even a single second. As an up-to-date range extender will not just provide the best networking experience but will also add a strong layer of security.
What Different LED Light Indicates ?
The smart LED on the front panel of Linksys RE6700 setup can help you understand its exact workings. So here’s what different colors indicates:
If you see green light after turning on the device, it means the RE6700 is all set for the setup.
Next up yellow light can indicate three different things. One is when the extender is under the booting task the light flickers. Next if the extender is reverting to factory settings or updating its firmware then also the light blinks yellow.
Lastly, if you see a red light, then it indicates a weak connection between the router and RE6700. But if the red light is flashing then it means the Linksys re6700 extender setup has failed or there is some other glitch.
Quick Setup Under 5 Minutes Using WPS
Users who want to get the range extender in the action at the earliest can set it up using the WPS button. The steps for it are:
After keeping the range extender in close proximity to the router, turn on Linksys RE6700.
Press WPS key on router.
Now under 120 seconds push WPS key on RE6700.
Let the synchronisation complete. It can take up to a few minutes so be patient here.
As it completes you can pursue strategic placement.
Disclaimer:- linksys-wifi.com is an online platform where we address different issues related to Linksys extenders and routers. We operate independently and we do not have any sort of accreditation with any manufacturer or third-party brand. The product images, illustrations, brand names, logos, and trademarks used on this page are only for informational and referential purposes. We provide our services only on users’ demand.
