One of the most common issues that Linksys router users face is that of red light. This problem is definitely frustrating but the good news is that it can also be solved within minutes by following a few troubleshooting steps. But before that do you know the reasons behind Linksys router red light? If not, then let us list out the same. When your Linksys router loses its connection to the internet then it shows a red light. Further, incorrect configuration, wrong deployment of the router, pending firmware updates as well as loose wiring connections can also be the major culprits. Now do you wish to get back online at the earliest? If yes, then check out the below written troubleshooting steps for Linksys router red light problem. 

Fastest Fix: Rebooting 

When it comes to technical problems like Linksys router red light, rebooting is often ignored. But let us tell you it can work like magic. So for rebooting follow these steps:

• Switch off power to the Linksys router. 
• Disconnect all the wires from its ports. 
• Now wait for about 30 to 60 seconds. 
• Now replug everything back and turn on the power. Let the router boot up. There are high chances that the router will now show a green light. But if it still shows red light, then head to the next step which is that of installation of pending firmware updates. 

Install Router’s Firmware Updates 

As written above, one of the other culprits behind Linksys router red light can also be pending firmware updates. So here’s how you can scan for updates and install them:

• Fetch your laptop and an Ethernet wire. Using this cable, build a connection between the router and the smart device. 
• You can also establish a wireless connection using the default credentials that are written on the router’s base/back panel. 
• Now open the internet browser of your choice. Go to the URL blank. In this blank type http://myrouter.local and hit enter. 
• Up next type the right login credentials and get access to the router’s main dashboard. 
• Now hit onto the Configuration tab, followed by Administration tab and finally on the Firmware Upgrade option. 
• Lastly tap on check firmware and if the update pops out then immediately follow the interface prompts for a successful installation. 

Rightly Deploy The Router 

If the router doesn’t have any pending firmware updates and still the Linksys router red light problem persists then there are high chances that you must have incorrectly positioned the router. So follow these right placement strategies for eradication of red light issue:

• Deploy the router in the center of your abode and make sure its connection to the modem is proper. 
• Never try to hide the router behind curtains, or do not make a mistake of keeping it inside any box be it of wood or metal. Always keep it in an open space that offers top notch ventilation. 
• If your Linksys router is surrounded by so many electrical and metal objects then surely the red light will pop out. So try to clean up the premises. The common objects that can turn out to be a culprit are: microwave, cordless phones, bluetooth devices, aluminium doors, fish tanks, vigilance cameras, baby monitors and many others of similar nature. 
• Lastly, we would suggest you keep the router on some higher elevation spots like on a table top or on some high wooden shelf. 

Connect To Your ISP

Linksys router red light occurs mostly when your router doesn’t have connection to the internet. So you must recheck if the internet plan is working well or not. For this you should connect to your Internet Service Provider. When none of the solutions work, then factory resetting of the router is the only solution that you can consider before connecting to the tech experts. 

You can reach out to the customer support team via phone, mail or through live chat.