There is no denying the fact that both technology and technical devices possess a very dynamic nature. One moment they would be working best to their abilities and the very next moment you might face a technical glitch thus halting your work. No matter from which brand you own a technical device, problems are going to pop up. Thus Linksys is no different. One such common issue that is often written by the users is that of Linksys router red light. So if you are also one amongst them, then this blog-post will definitely lend you a helping hand to troubleshoot the same. First understand that the issue is very common, so you need not panic. Just go through the below-written steps one by one. 

✓ Reboot The Linksys Router

Before you proceed with any other troubleshooting step for solving Linksys router red light problem, give rebooting a chance. It is the most overlooked solution. But remember simple rebooting holds the power to eradicate both minor as well as complex technical glitches. Therefore to restart the router, you need to perform three steps one after the other. Here are the steps:

• Begin by ceasing the supply of electricity to the router. For this simply unplug the power cord of the router from the switch board. 
• Now let the device sit unplugged for a minimum of 50 to 60 seconds.
• Thereafter move it back to its power socket. 

 

With this there are high chances your issue will be solved. 

✓ Install New Firmware Version 

The major culprit in Linksys router red light issue can be uninstalled updates. Remember not updating the firmware of your Linksys router means welcoming different problems like security issues, drop in network performance and other connectivity issues. So here’s how you can find the recent firmware file and install it down. 

 

First open up the authentic Linksys support website. Here put up the router number of your Linksys. The number is scribed on the router or you can find it in the user manual as well. As you find the latest firmware file, download it on your device. Now follow the below-written steps for installation:

 

• Take your networked device. On it open up the internet browser.
• Move to the address field. Type 192.168.1.1. Press Enter. 
• Fill up login information. Tap on Login. 
• Thereafter, move to the Connectivity option. Select Firmware Upgrade option. 
• Under the basic head select your new firmware file.
• Tap on Open, then on “Start” to begin the installation. 

 

As the upgrade takes place, the problem of Linksys router red light will most probably fade away instantly. 

✓ Right Placement Of The Router Is Crucial 

Users generally don’t pay attention towards the accurate placement of the router. This is the reason why most of the issues take place including Linksys router red light problem. Therefore we have listed a few important points that can help you with the right placement of the router. 

• First, always plot the router in a place which you consider as the center point of your abode. 
• Next, many users place the router in a congested area where there are too many physical barriers like walls and heavy furniture set. This can have a major impact on the working of the router. Therefore one should place the router in an open, well-ventilated space. Additionally, find some high surfaces like table top and shelves for its placement.
• Lastly, remember that few electrical and metal objects are considered close enemies of networking devices like routers. So common objects near to which you shouldn’t place the Linksys router are: microwave, cordless phones, security cameras, bluetooth devices, aluminium doors, baby monitors and objects of alike nature.

✓ Ensure Stable Internet Connection 

When your Linksys router is not connected to the Internet, then also it tends to show a red light. Therefore, to ensure proper internet connectivity, check the wired connection between the modem and the Linksys router. Next ensure there is an uncut power supply to both devices. Finally if everything is correct but still the Linksys router red light is there then connect to your Internet Service Provider. As there can be chances of some fault on their part. 

✓ Reset Can Lend A Helping Hand

When every troubleshooting step fails to solve the problem, factory reset lends a reliable helping hand. But remember frequent resetting of the gadget is not a good idea. As this can damage the device thus leading to irreparable loss. So here’s how users can carry out the reset process:

• Turn on Linksys router. Let it start up properly.
• Grab a sharp and sturdy toothpick. You can also use a paperclip. 
• Put the chosen object into the reset hole. Press it down. Hold on for a moment and let the front panel indicators flicker. 
• As you see flickering light, release the key. 
• Now commence fresh setup. 

If the Linksys router red light issue still persists, do not hesitate to seek help from the experts.