How Do I Connect My Linksys Router To My Computer ?
Connecting the Linksys router to the computer is quite crucial not only for initial setup of the router but also for so many other things like alteration of default settings, scanning for pending updates, using advanced features and more. Now the process for doing the same is extremely simple. Even if you do not know the technical world a bit, still you’ll be able to successfully pair the Linksys router to the computer system. All you need is simplified step by step guidance. So this is exactly where this blog post will lend you a helping hand. Without further delay, let’s get to the point.
Essential Preparations
A little preparation beforehand can save you from a lot of unnecessary hassle.
First power down the modem, router as well as your computer. Wait for about a minute. Thereafter replug everything back. This ensures a clear start which often prevents common connection issues.
Next up, you would require two ethernet wires. One will connect your Linksys router to the modem. The other one will connect Linksys router to the computer system. Make sure both the wires are in top-notch condition that is without any cuts and bruises.
Lastly, placement of the Linksys router is also crucial. So plot the device in a central place so that the entire place is able to receive wifi signals uniformly.
Physical Connection: The Crucial Step
The physical setup is straightforward. This is exactly where you get the answer to the question: How do I connect my Linksys router to my computer?
✓ Connect Modem To The Router
For connecting modem to the router first locate the Internet port on your Linksys router. It’s usually marked with a different color which is often yellow or blue. Then take an Ethernet wire. Plug it into the LAN port of the modem. Thereafter slip the other end into the internet port of the Linksys router.
✓ Connect Router To The Computer
This step is essential for the initial configuration. While you might use Wi-Fi later, a wired connection is the most stable way to set up the router. So take the second ethernet wire. Plug it into the LAN port of the Linksys router. Attach the other end to your computer’s Ethernet port.
✓ Power Up The Devices
As the physical connection is all done, you can now power up the gadgets one by one. Start by activating the modem first, wait for its power indicator to turn stable. Then activate the Linksys router and finally the computer system.
Complete The Configuration
For completing the configuration you need to open up an internet browser, it can be chrome, firefox, safari or any other of your preference. Thereafter, in the browser’s address bar type the router’s default IP address. It is 192.168.1.1. Alternatively you can also use 192.168.0.1. Once typed, click the enter key. Then fill in the username and passkey. It is admin for both fields. Once done tap on Login. Finally, you’ll have access to the main panel from where you can finish the first time setup. The interface will itself start providing you prompts for the same. So follow the prompts precisely.
Conclusion
By following the above written simple step by step guidance: from plugging the modem into the WAN port to plugging your computer into a LAN port you have successfully tackled How Do I Connect My Linksys Router To My Computer? Once the router is configured successfully, you can unplug the ethernet cable from your computer and connect wirelessly using the new Wi-Fi credentials that you created.