Linksys RE6300 Or Velop: Which is Better?

Using a linksys range extender or velop mesh system depends on the requirement of the user. If you just desire to extend the coverage of your existing router network then you can go with linksys re6300 setup. On the contrary if you need to upgrade your current networking system then you can opt for linksys velop setup. Setting up both linksys range extender or velop mesh network is simple. This guide will help you in gathering detailed information about both the systems.

Linksys RE6300 Setup

You can set up linksys re6300 range extender device very easily by using the WPS button or web interface. Linksys re6300 device will amplify the signals of your current router device. This device is widely used to eliminate dead zones. To add this device into your existing network you need following:

• A computer/ laptop/ mobile phone for web based setup
• Linksys re6300 device with power adapter
• Router with working internet connection
• Power outlet with electricity.
• Ethernet cord for wired based connection.

If you have all the above required objects then you can proceed with the setup as mentioned underneath.

WPS setup

WPS based setup is simple to proceed and takes only 10 minutes to add the device into your network. To initiate this you need to follow the below mentioned guide:

• Power up your range extender closer to the router.
• Press the WPS on the router following which on the range extender.
• Wait for a while and let the device connect.
• Make sure the whole process of pushing the button will complete within 2 minutes for success.
• Now you can relocate the device and test your new network created via Linksys RE6300 Setup.

Web setup

Web based setup is also not a difficult task. You can perform extra settings and secure your new network from unauthorized access. For web based configuration you should go with following steps:

• First of all you need to power up your extender closer to the router.
• Connect your computer/ laptop/ mobile phone with the range extender either by using ethernet cable or by accessing wifi.
• Then you need to access the web interface by using a web browser.
• Rush to the extender.linksys.com portal and initiate the Linksys RE6300 Setup.
• Connect the extender to the existing router by entering the router’s SSID & password during the setup process.
• Also create a new network name & password for extender’s network.
• Check for firmware updates and finish the process.
• Furthermore, relocate the device and don’t forget to test your new network created via Linksys RE6300 Setup

Linksys Velop Setup

Linksys velop setup can be done using linksys app. Setting up the device is not a daunting task if you are aware of the process. Velop setup will create a mesh network at your home that covers your whole home. With the linksys velop setup you can convert your home into a wifi hub. To add this device into your existing network you need following:

• A mobile phone
• Linksys velop device with power adapter
• Modem/ Router with working internet connection
• Power outlet with electricity.
• Ethernet cord for wired based connection.

If you have all the above required objects then you can proceed with the linksys velop setup as mentioned underneath.

• Power up your velop primary node.
• You can get the linksys app from google play store or app store, download it.
• Connect your modem/ router with the velop primary node using ethernet cable.
• Create your linksys account and initiate the setup.
• The app will guide you with the whole setup process.
• After configuring the primary node, add additional nodes to the network.
• Finish the configuration and test your new network.

Final Words

Linksys RE6300 & velop both the devices are perfect in their own way. It’s just a matter of requirement. You should opt for the device as per your need and usage.