Fix Linksys WiFi Not Working After Setup – Quick Solutions

Got your hands on Linksys wifi router but facing issues with the connectivity after setup? If yes, then you need not panic as this issue is very common. The potential reasons behind the same can be numerous. We understand it can be really frustrating if your networking device is not working properly. It’s because most of our daily life tasks are dependent on the Internet. So to help you out with the fixing of this particular issue, we are here with a reliable troubleshooting guide.

Reasons Why Linksys Wifi Is Not Working?

Before starting with the fixing of the issue, let’s first scrape out the main causes behind it. 

✓ First, if the initial setup or configuration is not correct, then this will definitely create a hindrance with seamless usage of the Linksys router. 

✓ Next, incorrect placement of the Linksys router can also be the major reason as to why you are facing the particular issue.

✓ Sometimes the issue is not with the Linksys wifi device, but on the side of your Internet Service Provider. So getting in touch with them might solve the issue. 

✓ Moving further, if your Linksys wifi router is not using the latest firmware then the connectivity issues will definitely persist. 

✓ Moreover, the overheating of a Linksys device can also create a hindrance with the connectivity. 

✓ Additionally, when two devices on your network end up with the identical IP address, then connectivity problems can arise.

Now as you are familiar with some common reasons, let’s fix it now, so you can get back in action. 

Quick Fixes

✓ Power Cycle Your Devices

To rectify the Linksys wifi not working issues, first you can take that of rebooting. This simple step has a capability to solve minor glitches and also refreshes the entire connection. So to power cycle your modem as well as the Linksys router follow three simple steps:

• First withdraw the supply of electricity by detaching them from the power socket. 
• Now hold on for a good one to two minutes.
• Finally, first replug the modem, let it reinitialize properly.
• Thereafter replug the Linksys router. Let its smart LED light indicator depict a solid bright light. 

✓ Double Check Your Setup

Even a minor mistake with the initial setup like connecting the cables to the wrong port won’t allow you to use the device. Therefore, recheck if the setup is correct or not. 

For this, first make sure the wire that is connecting your modem and the router is working properly. It shouldn’t have any bruises on it as well. The connection should be secure and not loose. 

Thereafter ensure the supply of electricity is consistent and if your particular Linksys model consists of an ON/Off switch, then it should be turned towards On. 

Moving further, recheck if you are using the right password for connecting to the Linksys wifi network or not. 

✓ Update The Firmware 

Pending firmware updates will not only lead to improper working of the router but can also hamper the security of your network. So it’s extremely important to always keep the router running on its latest firmware version. To look for the pending updates, you need to login into your Linksys router’s main dashboard. From there move towards the firmware upgrade option. Now what you need to do is just follow the on-screen prompts to install the update. For removing the hassle of manually checking for the updates, you can turn on automatic update option. So that next time whenever the manufacturers release the updates, you get an instant notification. 

✓ Optimize Router Placement 

Strategic placement of the networking device like Linksys wifi router plays a very crucial role in how the device will perform. So if your placement spot is not right, then the working issue is destined to pop up. Here’s how you should place the router:

• Place it in a central area of your abode. This will ensure better and uniform signal transmission.
• Next, remember electrical and metal objects like microwave, ovens, refrigerator, cordless phones, bluetooth devices, security cameras, ceiling fans, fish tanks, baby monitors as well as aluminum doors can be the enemy of Linksys wifi router. So it’s advisable to not keep the router in such an area. 
• Moving forward, using the top shelves or table top for keeping the router will be considered a good move.
• Additionally, avoid the placement nearby thick concrete walls or in between glass walls as this may again create a hindrance. 

✓ Check For Overheating 

If you keep the router in an area where ventilation is not proper, then the router may overheat due to which its internal hardware may slow down or stop working temporarily. So it’s important to let it cool down to the normal room temperature. Sometimes, there is also a dirt accumulation in the vents. So ensure you sweep up that as well. Moreover, if you place anything on top of the router, especially any electrical gadget, then remove that immediately. 

✓ Check Internet Status With ISP

Before going too deep into router troubleshooting, rule out issues from your ISP. There are chances that internet services in your locality might not be working accurately. So it’s better to connect with the ISP to rectify about the same. In case there is no issue from the side of ISP then move to the next troubleshooting step. 

✓ Assign Static IP Addresses

If you’re facing frequent disconnections then it’s advisable to assign static IPs to your key devices. As this can help with the prevention of IP conflicts.The steps for the same are:

• Log in to your router’s admin panel.
• Navigate to the DHCP settings.
• Give a static IP address to your most-used devices.

✓ Factory Reset: The Ultimate Saviour 

If none of the above written quick fixes sails your boat then factory reset is the key. For factory reset, ensure the proper activation of the Linksys router. Thereafter, with the help of a straightened paper clip or an object similar to it, push down the reset key. Hold on for ten seconds. And then release. Redo the configuration to get back in action.