How To Connect The Linksys RE6300 Extender To The Router?

Linksys is one such networking brand that offers a wide variety of dependable wifi range extenders. One such masterpiece creation is Linksys RE6300. This one operates on dual frequency bands, inhibits two external antennas, a smart status indicator, an Ethernet port, quick WPS setup button as well as features a simple and direct plug in design. So if you also got one of it for your abode then get ready to eliminate all sorts of wifi connectivity problems that are from wifi dead zones to slow wifi speeds. For leveraging all these benefits, you just need to conduct the Linksys re6300 setup errorlessly. So in this blog post we’ll be sharing the two quick setup methods. 

Wifi Protected Setup Method 

Firstly ensure your router features a WPS button. If not, then you can directly jump to the second Linksys re6300 setup method. Now check out the steps for the first method:

• Find out the electrical outlet closest to the router. 
• Plug the RE6300 extender into it and switch on the power. 
• Up next, wait for the status light to turn green. 
• Thereafter, press the WPS button of the router. When the WPS light on the router starts flickering, immediately press the WPS button of the RE6300. 
• Now just wait for a couple of seconds. You’ll notice the flashing lights have turned stable. This indicates completion of Linksys Re6300 setup via WPS. 
• Finally, you can now relocate the wifi extender. Deploy it to an area where the router’s signal drops to half that is 50 percent. 

Web GUI Setup Method 

This second setup method is more traditional and thus widely used. For seamless execution, you must first collect all the setup components. You require a well working router and its exact SSID and passkey. Thereafter, you need a smart device as well as a web browser on it. Moving further, you need access to an Ethernet wire (optional) and a well working vacant power outlet. With all these basic components, you can easily execute the Linksys re6300 setup within minutes. 

• So first deploy the extender in the center of the router and wifi dead zone. 
• Power it on and let its status light turn stable green. 
• Up next, take a smart device. Enable wifi and connect to “Linksys Extender Setup”. 
• As an alternative to the above step, you can also connect the devices using ethernet wire. 
• Once connected, open internet explorer or any browser. 
• Go to the URL blank. Type http://extender.linksys.com and push the enter key. 
• The main window pops out. Tap on Start setup option. Finally the interface will now guide you towards the remaining Linksys re6300 setup steps. So you just have to follow the guidance without skipping a single step. 
• Once completed, test the connectivity by strolling around the abode. 

If you have any more questions relating to the installation process, then do not wait and just take help from our customer support team.