How To Connect A Linksys RE6400?

Wish to boost your home network performance? Linksys RE6400 range extender device is the best option you have. Confused how to connect a linksys RE6400 device to your home network? Why to fear when we are here to help you. Just scroll down and read the further section very carefully. Gather the information about the step by step setup process. In addition to this you will get several other significant pieces of information such as set up requirements.

Linksys RE6400 Setup Requirements 

Before discussing how to connect a linksys RE6400, you should know what you need to complete the connection. Here is the checklist which you have to verify before starting the setup: 

• Linksys RE6400 Range Extender 
• Power outlet 
• Client device
• Ethernet cable 
• Host router with active internet connection
• Router the SSID and password 

Linksys RE6400 Installation

You can begin the installation of the device hardware and then proceed with the setup using any of the below specified methods. For the installation of the hardware you have to proceed with the following steps 

• Initiate with looking for a position to keep the device.
• Put the device on the location and connected with power. 
• Wait for the device to boot up properly and then proceed with the setup.

WPS Based Linksys RE6400 Setup 

How to connect a linksys RE6400 using the WPS button based process is yet confusing for many of the users. The process is very simple and you have to follow it after installing the hardware of the device as specified above. 

• You have to press the WPS button on the router device first. 
• Within the next 2 minutes following the router WPS button you need to push the WPS on the extender device. 
• Now monitor your extended device LED to confirm the setup is done or not. 
• If the LED turns green in colour without blinking then your connection is done successfully. 
• If the LED turns red it signifies the connection fails. In that case you have to verify that your router supports WPS connection or not and then try it again. You can also proceed with the web based setup if WPS setup is not working for you. 

Web Based Linksys RE6400 Setup 

Web base connection of linksys re6400 range extended device is simple. With the right guide you can do the configuration very easily and enjoy high speed internet with better coverage across your space. 

• After installing the device you can proceed with the web based set up by choosing a client device. 
• Connect the clan device to the RE6400 standard network using the information as mentioned on the device label. 
• Once the connection is done get access of the admin panel using the web browser. 
• Reach out to the admin panel using extender.linksys.com web address or default IP.
• Enter to the admin panel using username and password which is admin and password by default.
• Next you need to change the admin details, connect the extender with the router, create an SSID and password for the wireless network of the extender and other changes to the extender settings.
• Apply the changes by clicking on the save button and let the device boot up again. 

Connect Us

Our team is here to guide you how to connect a linksys RE6400 into your home network and boost its performance. The above specified guide will help you but if you are stuck somewhere then just call us. Our technical team will assist you to complete the configuration and resolve the trouble in which you get stuck. Don’t Think Too Much, Just Make A Call!